Did you know you can print from a mobile device? This article will walk you through the process. Please note, configurations may vary slightly due to device type. Android instructions can be found in the lower section of this article.
Jump to Android here.
iOS Installation Instructions
Open Safari and navigate to http://papercut0.davidson.edu:9163/setup and click Download
Choose Allow
Close and go to device Settings --> General --> Profiles
Select the PaperCut Mobility Print Profile
Choose Install and enter device passcode if prompted
Continue by clicking Install
Once installed, click Done, then open the document you want to print.
Once you select your document to print, choose Select Printer, then the PawPrint device you want to use to release your job.
Enter your Davidson username (without the @davidson.edu) and password. You should only need to enter this information once.
For further instructions of how to operate PawPrinters see this article.
Android Installation Instructions
Open a web browser and navigate to http://papercut0.davidson.edu:9163/setup and click Install
Open the App from the Play Store
Confirm Mobility Print Service
Confirm Print Settings
Choose print from the selected document
Select from the list of PawPrint options
Confirm your selection by clicking OK
You will be asked to authenticate
Enter your Davidson username (without the @davidson.edu) and password
You'll receive a notification indicating your print job has been submitted.
For further instructions of how to operate PawPrinters see this article.